Skip to main content

Table of Contents

Avoid Disappointments with AZ Garage Doors Today: Choose the Best Garage Door Sensors

At AZ Garage Doors Today, we know how crucial it is for you to have a garage door that works properly. This is why we provide superior garage door sensor services to ensure the safety, security, and efficiency of your garage door. Our sensors are built to last and contain cutting-edge technology that ensures consistent results. When you hire our skilled specialists to install your garage door, you can rest easy knowing that everything will go as planned and that your door will function perfectly. If you need garage door sensors, look no further than AZ Garage Doors Today, where you can take advantage of our 100% satisfaction guarantee, same-day service, and great customer care. Get in touch with us right away to arrange a meeting.

Common Problems with Garage Door Sensors

  • Misaligned sensors: If the sensors aren’t lined up right, they might send the wrong signals and stop the garage door opener from working.
  • Obstructed sensors: If dust, dirt, or spider webs build up on the sensors, the infrared beam won’t be able to pass through. This will make the sensors useless.
  • Loose connections: A garage door opener and its sensors can lose communication with one another if the connections between them loosen over time.
  • Power issues: If the sensors don’t get enough power, they might break down or stop working.
  • Dead batteries: If the sensors rely on batteries for power, dead batteries can render them useless.
  • Physical damage: The sensors can be broken by accidents or harsh conditions in the environment, which makes them useless.
  • Software problems: The sensors might not work properly if the software that controls them has bugs.

Importance of Garage Door Sensors

Sensors are installed on garage doors to detect if an object or person is in the way of the door’s closing motion. To function, they project an infrared beam over the doorway and detect any obstructions. The garage door opener receives a signal from the sensors and either stops or reverses the closing process if an obstruction is detected.

Sensors on garage doors are crucial for keeping people and pets safe, and their value cannot be emphasized. Particularly important for homes with kids or dogs who might mess with the garage door. Garage door sensors not only protect you from harm but also keep your door in working order by avoiding collisions. They improve your home’s safety by obstructing the garage door from the outside.

Simply put, garage door sensors are an important part of every garage door system and should be installed by every responsible homeowner.

Popular Types of Garage Door Sensors We Repair

  • Photo Eye Sensors: These infrared beam-based sensors are the most prevalent variety of garage door detectors.
  • Magnetic Sensors: These sensors use a magnetic field to find out if something or someone is in the way of the door as it closes.
  • Reed Sensors: These magnetic switches are put in the garage, and when the door hits something, they send a signal to the garage door opener.
  • Laser Sensors: These laser-based sensors monitor the area around the garage door, and if they detect an obstruction, they send a signal to the motor to either reverse direction or halt.
  • Infrared Sensors: These infrared sensors may detect an object in the path of the garage door and alert the opener to either reverse or stop.
  • Ultrasonic Sensors: High-frequency sound waves are used by these sensors to detect obstructions, and a signal is then sent to the garage door motor to either reverse the door’s movement or stop it completely.

Regardless of who made them or what technology they employ, AZ Garage Doors Today can fix your garage door sensors. With the help of our expert diagnostic and repair services, you can be assured that your garage door sensors will continue to keep your family safe.

Popular Garage Door Sensors Brands We Repair

The garage door sensors from all the main manufacturers are serviced by AZ Garage Doors Today.

  • Chamberlain – We provide the best Chamberlain Garage Door Sensors Service in AZ.
  • Genie – We provide the best Genie Garage Door Sensors Service in AZ.
  • LiftMaster – We provide the best Liftmaster Garage Door Sensors Service in AZ.
  • Craftsman – We provide the best Craftsman Garage Door Sensors Service in AZ.
  • Sears – We provide the best Sears Garage Door Sensors Service in AZ.
  • Clopay – We provide the best Clopay Garage Door Sensors Service in AZ.
  • Wayne Dalton – We provide the best Wayne Dalton Garage Door Sensors Service in AZ.
  • Amarr – We provide the best Amarr Garage Door Sensors Service in AZ.
  • Raynor – We provide the best Raynor Garage Door Sensors Service in AZ.
  • Marantec – We provide the best Marantec Garage Door Sensors Service in AZ.
  • Linear – We provide the best Linear Garage Door Sensors Service in AZ.
Garage Door Sensors Frequently Asked Questions

How to align garage door sensors?

To properly position your safety sensors, please read the procedures below:

  • It’s important to install the garage door’s safety reversing sensors no more than 6 inches off the ground, one on each side of the door where it tracks the garage floor.
  • Before aligning the lenses, you’ll need to loosen the wing nut on the front of the reception sensor (green LED). When the LED light on the receiver sensor stays lit, the wing nut can be tightened.
  • After both safeties reversing sensor LEDs are solidly lit, the garage door opener will go back to normal.
  • Close the garage door manually and with the remote to see if it works.

How to bypass garage door sensors?

Simply maintain finger pressure on the “wall” button (do not press and release). In order to close the garage door, you must press the wall button all the way down until it touches the floor, and only then can you let go. If you release the button before the door touches the ground, the sensors will engage again, and the door will reverse.

How to fix garage door sensor?

Easily Repair the Sensors on Your Garage Door by Following These  Steps:

1. Verify the Garage Door Sensors Are Properly Aligned

Checking your garage door sensors’ lights can indicate their functionality. The green light sends light, while the red light receives it. Blinking red lights indicate mismatched sensors. In a busy garage, sensors can easily be knocked out of alignment. If you use your space for work or storage, misalignment is more likely! Adjust each light. Your sensors are set when the red light stops blinking. The sun may be interfering with your sensor’s light beam, causing it to malfunction during certain times of the day. If so, shield the sensors from the sun with cardboard. However, don’t block the other sensor’s light beam with cardboard.

2. Check to see if the sensors on the garage door are dirty

If you open your garage door often or live near a busy street, your sensors can easily get dirty. Water might block sensors if you live in a humid environment or have sprinklers near your garage door. Dust and moisture can block light beams from sensors. Clean the sensors with a gentle, dry cloth. If that doesn’t work, unscrew and dry the metal holders. If you notice moisture, move your sprinklers away from your garage door to keep the sensors dry. At least once a year, clean your sensor lenses to avoid issues.

3. Verify the Sensor Wiring of the Garage Door

  • Wire damage from use, vermin, or the elements might harm your garage door sensor. Most sensors flash orange instead of red when this happens.
  • Check the sensors’ wires to the opener’s back terminal. Check for broken or twisted cords.
  • Untangle tangled wires and check their terminal connections. White wires go to the white terminal and black and white to the grey terminal.
  • Check the wires for chew marks or tampering. Seek water damage. Water can short-circuit sensors.
  • Replace the damaged wires. Unless you’re an electrician, get someone to replace the cables. Avoid electrocution! You can worsen the problem and harm the sensors.
  • Professionals can also check for broken parts in the rest of the automatic garage door system.
  • Wire damage can disrupt your automatic garage door system. To avoid property damage and injury, disconnect your garage door opener.
  • After replacing the wires and sensors, you can reconnect the garage door opener.

4. The Power Source Must Be Inspected Power supply issues may cause one or both garage door sensor lights to not light up. Check for power outages, blown fuses, or unplugged garage door systems. Disconnect the garage door opener while you investigate. This lets you physically close and opens the door until it works. Once electricity returns, your garage door opener and sensors should work. Check for blown fuses if your neighbors have power. If your circuit breaker is malfunctioning, unplug the garage door opener, turn the switch, and then plug it back in.

How much does it cost to replace garage door sensors?

Here is the price of new garage door sensors in case your old ones break or wear out. The whole price, including setup, should be around $100. It’s recommended to hire a pro to install garage door sensors. A garage door sensor and professional installation will set you back around $180.

How garage door sensors work?

The photo-eye is a common component of garage door safety sensors. You may install these infrared sensors on either side of your garage door, usually no higher than six inches off the ground. These two sensors work together to form a virtual barrier across your garage door, alerting you to any obstructions.

Cities we provide Garage Door Sensors services

Other Garage Door Services We Offer

    Book a Garage Door Service Appointment Today! (480) 500-7027